HPMC (Hydroxypropyl Methylcellulose) is a commonly used polymer in building materials, especially in cement-based materials. It is a non-ionic cellulose ether whose main characteristics are good water solubility, thickening, cohesion, water retention and film-forming properties.

1. Water retention effect
An important role of HPMC in cement is water retention. The water in cement mortar or concrete evaporates quickly in the initial stage, especially in dry and hot construction environments. Excessive loss of water will lead to insufficient hydration reaction of cement, thus affecting the formation of strength. HPMC can significantly improve the water retention of mortar and concrete. By forming a protective film on the surface of cement particles, it reduces the evaporation of water, ensures sufficient hydration of cement, and improves the final strength.

2. Improve constructability
HPMC has excellent thickening properties and can increase the viscosity of cement mortar or concrete, making it easier to apply and construct. It makes the mortar easier to operate during construction and less prone to sagging or delamination, thereby improving construction performance. For large-area construction or vertical surface construction, HPMC can ensure uniform coating of mortar and avoid material waste and construction quality problems caused by excessive fluidity.

3. Improve crack resistance
Cement-based materials shrink during the hardening process, and shrinkage stress may lead to cracking. HPMC slows down the drying shrinkage rate of cement slurry through water retention, thereby reducing the internal stress caused by drying shrinkage. In addition, HPMC improves the adhesion and flexibility of the mortar, allowing the material to better disperse stress when it is stressed and reduce the occurrence of cracks. This is particularly important for construction projects such as plastering mortar and screed materials that require high surface quality.

4. Improve frost resistance
In cold environments, the frost resistance of cement-based materials is a key performance indicator. The addition of HPMC can improve the freeze-thaw cycle resistance of mortar. The water retention and film-forming properties of HPMC make the moisture in the mortar more evenly distributed, reducing the damage of ice crystals to the internal structure of the material when freezing, and reducing the impact of freeze-thaw cycles on the durability of the material.

5. Enhance bonding strength
The application of HPMC in cement can also significantly enhance the bonding strength of cement-based materials. It improves the rheology of the cement slurry, allowing the slurry to better penetrate into the surface of the base material, increasing the contact area between the mortar and the base material, thereby improving the bonding strength. This is particularly important in tile adhesives and exterior wall insulation systems, as these applications require high-strength bonding to ensure construction quality and long-term durability.

6. Improve sag resistance
In some application scenarios, such as vertical surface construction or ceiling construction, cement mortar sagging is a common problem. The thickening effect of HPMC can significantly reduce the fluidity of mortar, improve its sag resistance, and ensure that the mortar can maintain a stable shape in complex construction environments. This not only improves the efficiency of construction, but also ensures construction quality.

7. Improve wear resistance
The addition of HPMC can increase the density of cement mortar and reduce surface porosity, thus improving its wear resistance. This is very important in applications such as floor screeds that are subject to long-term wear and tear. HPMC reinforced mortar has a denser surface after hardening, better wear resistance and longer service life.

8. Extend opening hours
HPMC can also extend the open life of cement-based materials, which is how long the material remains operable after construction. This is very beneficial for projects that require a long time to operate. Workers can adjust or repair the material before it is completely cured, which improves the flexibility and convenience of construction. Extended opening hours can also reduce construction quality problems caused by rushing work.

9. Control bubble formation
In certain applications, such as self-leveling floors, the formation of air bubbles can affect surface smoothness and aesthetics. Through its surface activity and thickening effect, HPMC can control the formation and release of bubbles, reduce the residual bubbles inside the material, and thereby improve the quality of the finished product.

10. Improve water resistance
HPMC can enhance the water resistance of cement-based materials by forming a dense protective film on the surface. This film not only prevents the penetration of external moisture, but also reduces the loss of internal moisture, thus improving the durability and service life of the material.

As a functional additive, the application of HPMC in cement-based materials has greatly improved the properties of the materials, including water retention, constructability, crack resistance, frost resistance, bonding strength, etc. It not only improves the performance of materials, but also brings more convenience and security to the construction process. Therefore, HPMC has been widely used in modern construction projects and has become one of the indispensable building material additives.